Filter
Top Products
INITIAL SETUP
11
4 INITIAL SETUP
This procedure allows setting up the reader to operate with the default settings:
Whenever you need to change the default values refer to par. 5.2.
4.1 RS232 INTERFACE SELECTION
The Gryphon™ D432/D432E reader requires the RS232 interface cable and the
AC/DC power adapter to be connected.
To install and configure your reader with the RS232 interface, follow these
instructions:
Make all system connections as shown in Figure 3:
1.
Figure 3 - RS232 Connection
Read the restore default parameter code below:
2.
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Read the RS232 interface selection code:
3.
RS232
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFEHFKK
AMGNPJCJGIIJCMCEGJMHNDOLLK
AIFBJLBGMHPLNKECPCGMBBIBOK
AAPHBAJJDAAGMGKDDAOHBGGLHK
AEKFBONJCDDIECLFJIJKMCHLIK
DLDDLDLDLLDLLLLDLLDDDLDLLL
4.
Power up your PC.
RS232 is the default interface set at the factory.