Filter
Top Products
GRYPHON™ D432/D432E
18
Configuration Field Default Setting
Data Format-Symbology Dependent Parameters
Symbology Specific Format Select All
Symbology Headers No headers
Symbology Terminators No terminators
Symbology Character Substitution No character to substitute
Symbology Character Deletion No character to delete
Data Format-Concatenation
Concatenation Disabled
Define Concatenation 2 EAN/UPC codes concatenated
Set First Concatenated Code Length 000 = any length
Set Second Concatenated Code Length 000 = any length
Set Third Concatenated Code Length 000 = any length
Set Fourth Concatenated Code Length 000 = any length
Concatenation with Intercode Delay Disabled
Concatenation Timeout 10 seconds
Concatenation Failure Transmission Tx codes causing failure
Transmission after Timeout No code transmission
Concatenation Result Code ID No code Identifier
Advanced Formatting
Format enable/disable Disabled
Camera Control
Exposure Mode Automatic, based on entire image
Code Selection
Issue Identical Codes Enabled
EAN/UPC/JAN
Selection Enabled
Add-On Disabled
UPCE Expansion Disabled
Code 39
Selection Enabled - no check digit
Code39 Full ASCII Disabled
Code Length Check Disabled
Minimum Length 001
Maximum Length 255
Start/Stop Character Disabled