Filter
Top Products
E-4203/E-4204/E-4304 49
Label advances 1-2 inches before a fault indication
• The ribbon is installed incorrectly. Make sure that the dull
side (side with ink) is facing the paper.
• A bad ribbon/paper combination is resulting in an
insufficient amount of friction between paper and ribbon.
Ensure that the correct type of ribbon is being used.
Label advances 16 inches before a fault indication
• The media is not loaded properly, see Chapter 5. When
loading media be certain that the media hub and media
guide is against the media and that gaps or marks in the
labels are in line with the media sensor.
• The media sensor or media sensor circuitry may be
defective, call for service.
Tracking Problems
• The media is not loaded properly, see Chapter 5. When
loading media be certain that the media hub and media
guide is against the media.
• The media width adjustment thumbwheel is not set
properly, (see Chapter 5).