1-2 Rack Installation Guide
Refer to the safety instructions provided in your
System Information
booklet for addi-
tional safety information.
Rack Kit Contents
To install the system in a 2-post center-mount configuration, use the following items
from the rack kit (see Figure 1-1):
• Four center-mount brackets
• 1-U template
• Eight 10-32 x 0.25-inch pan-head Phillips screws
• Eight 12-24 x 0.5-inch pan-head Phillips screws
Figure 1-1. Two-Post Center-Mount Rack Kit Contents
Recommended Tools and Supplies
You need the following tools and supplies to install the system in a two-post open-
frame relay rack:
• #2 Phillips screwdriver
• Masking tape or a felt-tip pen, for use in marking the mounting holes to be used
center-mount brackets (4)
12-24 x 0.5-inch pan-head
Phillips screws (8)
10-32 x 0.25-inch pan-
head Phillips screws (8)
1-U template
