Filter
Top Products
support.dell.com Rack Installation Guide 1-21
Installing the System in the Rack
CAUTION: Because of the size and weight of the system, never attempt to
install the system chassis in the rack by yourself.
To install the system chassis into the rack, perform the following steps:
1. Extend the slides on the system chassis as far back as they will go.
2. Position the system chassis in front of the top cover and gently insert the slide
assemblies on the system chassis into the left and right rails inside the top cover.
After the system has travelled a few inches into the top cover, it will stop.
3. Press in on the left and right side slide release buttons to release the slide, and
slide the system chassis all the way in until it stops (see Figure 1-17).
4. Tighten the captive thumbscrews on each side of the system’s front panel to
secure the system to the rack.
Figure 1-17. Installing the System in the Rack
captive
thumbscrew