Filter
Top Products
1-6 Rack Installation Guide
Rack Kit Contents
To install the system in a two-post flush-mount configuration, use the following items
from the rack kit (see Figure 1-4):
• Two front-panel spacers
• Two mounting brackets
• Two 12-24 x 0.75-inch truss-head Phillips screws
• Four 12-24 x 0.5-inch pan-head Phillips screws
• Four 10-32 x 0.25-inch pan-head Phillips screws
• One 1-U template
Figure 1-4. Two-Post Flush-Mount Rack Kit Contents
Recommended Tools and Supplies
You need the following tools and supplies to install the system in a two-post open-
frame relay rack:
• #2 Phillips screwdriver
• Masking tape or a felt-tip pen, for use in marking the mounting holes to be used
front panel spacers (2)
10-32 x 0.25 inch
pan-head Phillips
screws (4)
1-U template
mounting brackets (2)
12-24 x 0.75-inch
truss-head Phillips
screws (2)
12-24 x 0.5-inch
pan-head Phillips
screws (4)