Filter
Top Products
support.dell.com Rack Installation Guide 1-15
CAUTION: Store the two doors where they will not injure someone if the
doors accidently fall over.
3. Remove the front door from the rack as shown in Figure 1-11.
a. With the door open, lift out and fully retract all hinge pins.
b. Once all the hinge pins have been retracted, lift the door out.
Figure 1-11. Removing the 24-U Rack Doors
If you want to reverse the door so that the handle is on the other side, perform the
following steps:
1. With the door open, lift out and fully retract all hinge pins.
2. Remove the hinges and door brackets from the door frame.
3. Replace the hinges and door brackets on the opposite side and switch the posi-
tion of the handle.
4. Replace the rack door (see “Replacing the Rack Doors,” found later in this guide).
hinge insert
hinge
hinge pin