Filter
Top Products
1-20 Rack Installation Guide
5. Push the top cover onto the studs on the slide assemblies until the top cover
stops (see Figure 1-16).
Ensure that the slots and studs have completely engaged.
At the front of the rack, make sure that the horizontal tab on the lower edge of
the top cover’s mounting flange enters the lower hole, just beneath the bottom
edge of the slide assembly (see Figure 1-16).
6. Secure the top cover to the rack’s left and right vertical rails using two
10-32 x 0.375-inch pan-head Phillips screws (see Figure 1-16).
Figure 1-16. Installing the Top Cover in the Rack
inner rail
shoulder
studs
top cover
mounting flange
10-32 x 0.375-inch
pan-head Phillips
screw (1 per
mounting flange)
top cover
bottom edge
of slide
assembly