Filter
Top Products
Enter the IP address of the print server into your Web browser.1.
From the menus at the left of the Web page, choose Configuration.2.
From the list of configuration options on the right, choose AppleTalk.3.
From the AppleTalk page, choose Advanced Settings.4.
From the AppleTalk Advanced Settings page, view the Data Mode pop-up menu. If the menu is
set to IOP/EOP, do not change it. If it is set to TBCP, change it to Raw Mode.
5.
Calling for Service
Before calling for service, check the following:
Is the power cable plugged into the printer?
Is the power cable plugged directly into a properly grounded electrical outlet?
Is your printer properly connected to your computer or network?
Are all other devices attached to your printer plugged in and turned on?
Is the electrical outlet turned off by any switches?
Did a fuse blow?
Has a power outage occurred in your area?
Is a toner cartridge installed in your printer?