Filter
Top Products
Installing the Coin-Cell Battery
1. Place the coin-cell battery on the system board until it snaps in place.
2. Install the cover.
3. Follow the procedures in After Working Inside Your Computer.
Removing the Hard-Drive Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Follow the steps to remove the hard-drive assembly from the computer:
a. Disconnect the SATA cable and power cable from the hard drive [1] [2].
b. Remove the screws that secure the hard-drive bracket [3] and lift it upwards to remove it from the
computer [4].
4. Follow the steps to remove the hard-drive bracket.
a. Remove the screws that secure the hard-drive bracket.
b. Lift and remove the hard drive from the hard-drive bracket.
11