Filter
Top Products
Installing the Hard-Drive Assembly
1. Replace the hard drive into the hard-drive bracket.
2. Install the screws that secure the hard-drive bracket.
3. Install the hard-drive assembly into its slot on the computer.
4. Install the screws that secure the hard-drive assembly to the computer.
5. Connect the SATA cable and the power cable to the hard-drive assembly.
6. Install the:
• bezel
• cover
7. Follow the procedures in After Working Inside Your Computer.
Removing the Optical Drive
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Follow the steps to remove the optical drive:
a. Disconnect the data cable [1] and power cable [2] from the optical drive.
b. Remove the screws that secure the optical drive [3].
c. Slide the optical drive from the drive bay to remove it from the computer [4].
12