Filter
Top Products
3. optical drive 4. card-reader bay
5. I/O board 6. power-switch board
7. hard drive 8. coin-cell battery
9. VGA card 10. expansion card
11. heatsink module 12. system fan
Removing the Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Follow the steps to remove the cover:
a. Remove the screws that secure the cover to the computer [1].
b. Slide the computer cover towards the back of the computer [2].
c. Lift and remove the cover from the computer [3].
Installing the Cover
1. Place the cover on the computer and slide to install the cover.
2. Tighten the screws to secure the cover to the computer.
3. Follow the procedures in After Working Inside Your Computer.
Removing the Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Follow the steps to remove the bezel:
a. Pry the front panel retention clips from the chassis to release the front bezel [1].
b. Lift and remove the bezel from the computer [2].
9