Filter
Top Products
Installing the Card Reader
1. Slide the card reader into its slot until it snaps into place.
2. Tighten the screws to secure the card reader to the computer.
3. Thread the card reader power cable through the metal clip.
4. Connect the power cable of the card reader to the system board.
5. Install the:
• bezel
• cover
6. Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Press down on the memory-retention tabs on each side of the memory modules and lift the memory
module upwards to remove it from the computer.
14