Filter
Top Products
Installing the Optical Drive
1. Push the optical drive into the optical-drive bay until it snaps into place.
2. Tighten the screws to secure the optical drive to the computer.
3. Connect the data cable and power cable to their connectors on the optical drive.
4. Install the:
• bezel
• cover
5. Follow the procedures in After Working Inside Your Computer.
Removing the Card Reader
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Perform the following steps to remove the card reader:
a. Disconnect the power cable of the card reader from the system board [1].
b. Un-thread the power cable from the metal clip [2].
c. Remove the screws that secure the card reader to the computer [3].
d. Push the card reader towards the front of the computer and slide the card reader to remove from
the computer [4].
13