Filter
Top Products
Installing the Input/Output (I/O) Panel
1. Slide the I/O panel into its slot on the computer.
2. Tighten the screw to secure the I/O panel to the computer.
3. Route the cables through the metal-rentention clips.
4. Connect the I/O panel and FlyWire cables to their connectors on the system board.
5. Install the:
• bezel
• cover
6. Follow the procedures in After Working Inside Your Computer.
Removing the System Fan
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Follow the steps to remove the system fan:
a. Disconnect the fan cable from the system board.
b. Remove the screws that secure the system fan to the computer.
c. Push the system fan inwards and remove it from the computer.
21