Filter
Top Products
Setting Up 21
Swapping Devices While Windows Is Running
NOTICE: To prevent irreparable damage to the docking connector, do not
replace devices while the computer is connected to an APR.
In Microsoft Windows 98 or Windows Me
1
Right-click the Softex BayManager icon on the Microsoft Windows
taskbar.
2
Click Remove/Swap.
3
Keep the display open, and tilt the computer back so that you can
access the bottom of the computer.
4
Slide and hold the latch release, and pull the device out of the modular
bay.
5
Insert the new device into the bay, and push it until you hear a click.
6
Click OK. Then, click OK again to close the Softex BayManager
window.
In Microsoft Windows 2000
1
Double-click the Unplug or Eject Hardware icon on the Microsoft
Windows taskbar.
2
Click the device you want to eject and then click Stop.
3
Click OK and wait until the device you want to eject is cleared from
the list of devices in the Unplug or Eject Hardware window.
4
Keep the display open, and tilt the computer back so that you can
access the bottom of the computer.
5
Slide and hold the latch release, and pull the device out of the modular
bay.
6
Insert the new device into the bay, and push it until you hear a click.
7
When Windows recognizes the new device, click Close.