Filter
Top Products
Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
3. Grasp the VRM by its top corners, and ease it out of the connector.
4. If you are installing a new VRM, see "Installing a VRM
."
If you are not installing a new VRM, continue with step 5.
5. Install the processor airflow shroud.
6. Close the computer cover
.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
7. Connect your computer and devices to electrical outlets, and turn them on.
Control Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
Control Panel Components
1 control-panel connector
2 alignment hole