Filter
Top Products
Installing Enclosure Components 61
Figure 3-4. Removing and Installing a RAID Controller Module
Installing a RAID Controller Module
1
Carefully insert the RAID controller module into the empty module slot.
2
Push the module to the back of the slot until it is firmly seated in the
backplane connector (see Figure 3-4).
3
Push the release lever in (towards the
enclosure
) until the module is
retracted into the slot and is secure.
For information on controller connections and cabling, see
the
PowerVault
MD3000i Installation Guide
.
1 release tab 2 release lever
2
1