Filter
Top Products
Error Code Message Information
2. Turn off the system and remove input power for one minute.
3. Ensure the processor is seated correctly.
4. Reapply input power and turn on the system.
5. If the issue persists, see Getting Help.
FAN0000
Message Fan <
number
> RPM is less than the lower warning threshold.
Details Fan operating speed is out of range.
Action Remove and reinstall the fan. If the issue persists, see Getting Help.
FAN0001
Message Fan <
number
> RPM is less than the lower critical threshold.
Details Fan operating speed is out of range.
Action Remove and reinstall the fan. If the issue persists, see Getting Help.
FAN1201
Message Fan redundancy is lost.
Details Fan has failed.
Action Remove and reinstall failed fans or install additional fans.
HWC1001
Message The <
name
> is absent.
Details The absent device may be necessary for proper operation. System
functionality may be degraded.
Action Reinstall or reconnect the hardware.
HWC2003
Message The storage <
name
> cable is not connected, or is improperly
connected.
Details The cable may be necessary for proper operation. System
functionality may be degraded.
Action Check if the cable is present, then reinstall or reconnect.
HWC2005
Message The system board <
name
> cable is not connected, or is improperly
connected.
Details The cable may be necessary for proper operation. System
functionality may be degraded.
Action Check if the cable is present, then reinstall or reconnect.
MEM0000
Message Persistent correctable memory errors detected on a memory device
at location(s) <
location
>.
91