Filter
Top Products
Using a Flash Memory Card | 51
11
Using a Flash Memory Card
This appendix provides information about using an external flash memory card and contains the
following sections:
• External Flash Memory Card Overview
• Formatting an External Flash Card
• Inserting the External Flash Memory Card
• Removing the External Flash Memory Card
• Copying Files to the External Flash
• Displaying Files Stored on the External Flash
External Flash Memory Card Overview
Each RPM card is designed with a slot to accommodate an external flash memory card (slot0:). You can
use a flash card to copy the image and configuration files for storage and backup purposes. For complex
configurations, use the copies for other E600i systems in your network. Configure your boot execution
process to use the images stored on a flash card as the primary (active), secondary (standby), or default
boot order preference. Optional external flash memory cards are shipped blank.
Inserting the External Flash Memory Card
NOTE: Only insert the external flash before system boot or after the system has completed its boot and is run-
time mode.
To install the flash memory card:
Removing the External Flash Memory Card
To remove the flash memory card:
Step Task
1 Press the ejector button to ensure it is in the extended position. Hold the flash card vertically (with the manufacturers
able on the left and the barcode on the right).
2 Gently insert the flash card into the primary RPM flash slot until the is card is flush with the front panel. Do not
force the flash card into the slot.
3 The In Use LED illuminates only during read or write operations.
Step Task
1 Extend the ejector button by pressing the ejector button. Then press the ejector button again to eject the memory
card.
2 Remove the card and store it in an antistatic bag.