Filter
Top Products
System Specifications | 65
C
System Specifications
This appendix contains the following major sections:
• Chassis Physical Design
• AC Power Supply Unit Requirements
• DC Power Entry Module Requirement
• Agency Compliance
Chassis Physical Design
Parameter Specifications
Height 28 inches (71.1 cm)
Width 17.4 inches (44.2 cm)
Depth (without cable management system) 21.5 inches (54.6 cm)
Chassis weight with factory-installed components
(backplane and air filter)
81 pounds (36.7 kg)
Weight fully loaded (backplane, air filter, fan tray,
SFMs, RPMs, and 7 line cards)
242 pounds (109.8 kg)
Mounting Factory-installed rack mount brackets for front, center, or
rear mounting in a standard 19-inch rack.
Optional brackets for mounting in a standard 23-inch rack or
cabinet.
Rack clearance required Front: 18-inches
Rear: 20-inches
Maximum Thermal output:
NOTE: Thermal output is directly proportional
to system configuration and number of line cards.
• Maximum for fully loaded chassis 120 VAC powered: 4705W (16,065 BTU/hour)
200/240 VAC powered: 4250W (14,500 BTU/hour)
DC powered: 2800W (9600 BTU/hour)