Filter
Top Products
44 Removing and Installing Parts
3
Pull module back to release.
If the module is difficult to remove, gently ease the module back and forth to remove it from the
connector.
Installing Memory
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
"Safety, Environmental, and Ergonomic Instructions" on page 48.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your
body before you touch any of your computer’s electronic components. You can do so by touching an unpainted
metal surface on the computer chassis.
1
Follow the procedures in "Before You Begin" on page 37.
2
Carefully bend out the securing clip at each end of the memory module connector.
3
Align the notch on the bottom of the module with the crossbar in the connector.
1 notches (2) 2 memory module 3 notch 4 crossbar
4
2
1
1
3