Filter
Top Products
54 Appendix
System Setup
Overview
Use system setup as follows:
• To change the system configuration information after you add, change, or remove any hardware in
your computer
• To set or change a user-selectable option such as the user password
• To read the current amount of memory or set the type of hard drive installed
Before you use system setup, it is recommended that you write down the system setup screen
information for future reference.
NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes
can make your computer work incorrectly.
Entering System Setup
1
Turn on (or restart) your computer.
2
When “Enter Boot Menu” is displayed, press <Del> to enter (or <F1> to enter from reinstall), or
<F2> to continue.
Link light solid yellow light indicates network connection
Link integrity light orange off — 10 Mb operation
orange light — 100 Mb operation
Power
DC adapter:
Wattage
65 W
Voltage
automatic selection power supplies — 100 to 240 V at 50/60 Hz
Backup battery 3-V CR2032 lithium coin cell
Physical
Height 7.5 cm (2.95 inches)
Width 27.0 cm (10.63 inches)
Depth 22.5 cm (8.86 inches)
Weight 3.6 kg (7.93 lb)
Controls and Lights