Filter
Top Products
Figure 11. Removing and installing the cable cover
1. cable cover 2. cooling shroud
3. SATA cables (2) 4. sled
5. release latch 6. tabs on cable cover
Installing the cable cover
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Align the tabs on the cable cover with the slots on the cooling shroud.
NOTE: Ensure that the cables are routed properly on the cooling shroud before installing the cable cover.
2. Lower the cable cover on to the cooling shroud until the tabs on the cable cover engage with the slots on the
shroud.
3. Slide the cable cover toward the front of the sled, until it engages with the release latch on the cooling shroud and
is firmly seated.
34