Filter
Top Products
1
About your system
This document provides information on the Dell PowerEdge FM120x4 systems, installed in the Dell PowerEdge FX2
enclosure. For information on the enclosure components, including shared resources like the power supplies, Chassis
Management Controller (CMC), cooling fans, and I/O modules, see the
Dell PowerEdge FX2 and FX2s Enclosure Owner’s
Manual
at dell.com/poweredgemanuals.
Terms used in the document
The following table describes the terms used in this document.
Term Description
Enclosure Refers to the PowerEdge FX2 enclosure.
Sled or system Refers to the PowerEdge FM120x4 system.
Nodes Refer to the four compute nodes (Intel Atom C2000
processors) in the FM120x4 sled. Each node functions as
an independent server and can be remotely managed
through individual iDRACs.
Hard-drive/SSD bay Refers to the slots on the sled front panel in which the
hard drives/SSDs are installed.
Warm swap A component is considered warm swap if the node
associated with the component must be turned off before
adding or replacing the component. However, the sled and
the rest of the nodes remain powered on.
Hot swap A component is considered hot swap if it can be removed
or installed while the nodes and the sled are powered on.
7