Filter
Top Products
Item Indicator, Button, or
Connector
Icon Description
3 Node status indicators Provide information about the status of the four
nodes in the sled.
4 USB select button Allows you to assign the USB port to a particular
node in the sled.
5 USB connector Allows a USB device to be connected to the system.
6 Sled handle Used to slide the sled out of the enclosure.
Hard-drive/SSD indicator patterns
The hard-drive/SSD indicators display different patterns as drive events occur in the system.
NOTE: The sled must have a hard drive/SSD or a hard-drive/SSD blank installed in each drive bay.
Figure 3. Hard-drive/SSD indicators
1. drive activity indicator (green) — 2.5 inch hard
drive/SSD
2. drive status indicator (green and amber) — 2.5 inch
hard drive/SSD
3. drive activity indicator (green) — 1.8 inch SSD 4. drive status indicator (green and amber) — 1.8 inch
SSD
NOTE
: If the drive is in Advanced Host Controller Interface (AHCI) mode, the status LED (on the right side) does not
function and remains off.
Drive-Status Indicator Pattern
Condition
Blinks green two times per second Identifying drive or preparing for removal
Off Drive ready for insertion or removal
9