Filter
Top Products
System Setup Program A-5
Auto Power On Allows you to set the day and time you want
the system to power on automatically. The
time uses the 24-hour format.
Power
Management
With the
Power Management option
enabled, DPMS monitors and most EIDE
drives automatically switch into low-power
mode during periods of system inactivity.
&$87,21%HIRUHHQDEOLQJWKLVIHDWXUH
FKHFNWKHPRQLWRUGRFXPHQWDWLRQWR
PDNHVXUHWKDWWKHV\VWHPKDVD'306
FRPSOLDQWPRQLWRU2WKHUZLVHWKHUHLVD
ULVNRIGDPDJLQJWKHPRQLWRU
NOTE: Not all EIDE hard-disk drives support
this feature. Enabling this feature for a drive
that does not support it may cause the EIDE
drive to become inoperable until the system is
restarted and the
Power Management
option
is disabled.
Wakeup On LAN Wakeup On LAN determines whether the
Wakeup On LAN feature is set to Off or On.
You must reboot your system before a change
takes effect.
Sound Enables (On) or disables (Off) the integrated
sound controller.
NIC Enables (On) or enables without PXE support
(On [PXE Off]) or disables (Off) the integrated
NIC.
Mouse Enables or disables the built-in PS/2-
compatible mouse port.
Serial Port 1 Configures system’s built-in serial port 1.
Serial Port 2 Configures system’s built-in serial port 2.
Parallel Port Configures system’s built-in parallel port.
The port’s I/O address may be set to 278h
,
3BCh, or 378h
.
Otherwise, the port may be
disabled.
Parallel Mode Controls whether system’s built-in parallel port
acts as an AT-compatible (unidirectional) or
PS/2-compatible (bidirectional) port.
IDE Hard Disk Enables system’s built-in EIDE hard-disk drive
interface.
Diskette Enables system’s built-in diskette drive
controller.
Speaker Enables onboard speaker.
7DEOH$6\VWHP6HWXS2SWLRQVFRQWLQXHG
2SWLRQ )XQFWLRQ