Filter
Top Products
Removing and Replacing Parts 4-7
9. Remove the memory modules.
Carefully spread the inner metal tabs of the memory module socket to dis-
engage the module from the socket. The module should pop up slightly.
Then pull the memory module out of the socket (see Figure 4-9).
)L JXUH0HPRU\0RGXOH5HPRYDO
10. Remove the video card.
Remove the two 3-mm screws securing the video card (see Figure 4-10).
Gently pull the video card off of the connectors on the bottom of the sys-
tem board by lifting it at the notches located between the screws. Do not
rock the card to remove it because this may damage the connectors.
)L JXUH9LGHR&DUG5HPRYDO
Inspect the two thermal pads on the bottom of the system board and
replace them if necessary.
memory module
sockets (2)
bottom of computer
memory module
metal tabs
video card
bottom of computer
video card
connectors (2)
3-mm screws (2)