Filter
Top Products
4-8
'HOO,QVSLURQ6HUYLFH0DQXDO
11. If present, remove the combo module or secondary battery from the
options bay.
Unlock the latch lock by flipping it toward the back of the computer (see
Figure 4-11). Slide the latch release in the direction of the arrow. Keep hold-
ing the latch release with one hand while pulling the combo module or
secondary battery straight out of the options bay with the other.
)LJXUH&RPER0RGXOHRU6HFRQGDU\%DWWHU\5HPRYDO
NOTE: If the computer is booted with a diskette drive or secondary battery
in the options bay, you must reboot after installing the combo module in
the options bay.
=,)&RQQHFWRUV
&$87,21=,)FRQQHFWRUVDUHIUDJLOH7R DYRLGEUHDNLQJWKHFRQQHF
WRUVWRXFKWKHPFDUHIXOO\'RQRWDSSO\WRRPXFKSUHVVXUHWRWKH
PRYDEOHSDUWRIWKHFRQQHFWRUZKHQRSHQLQJRUFORVLQJLW
Some of the computer’s interface connectors are zero insertion force (ZIF)
connectors. These connectors are not removable; they must be released to
disconnect a cable from them.
To disconnect a cable from a ZIF connector, follow these steps:
1. Insert a small flat-blade screwdriver or dental pick under the movable part
of the connector (see Figure 4-12).
For most ZIFs, carefully pry up first one end of the movable part of the con-
nector and then the other end. Some ZIFs may need to be lifted in the
center.
bottom of computer
combo module or secondary battery
latch lock
(unlocked position)
latch
release