Filter
Top Products
13. Pull the pull-tab to disconnect the camera cable from the connector on the camera module.
14. Lift the camera module off the display back cover.
Replacing the Camera Module
1. Follow the instructions in Before You Begin.
2. Connect the camera cable to the connector on the camera module.
3. Adhere the tape that secures the camera cable to the camera module.
4. Use the alignment posts to place the camera module on the display back cover.
5. Replace the display bezel (see Replacing the Display Bezel).
6. Replace the display assembly (see Replacing the Display Assembly).
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).
1
tape
2
camera module
1
camera-cable connector
2
camera module