Filter
Top Products
Replacing the Speaker
1. Follow the instructions in Before You Begin.
2. Route the speakers cable through the routing guides
3. Align the screw holes on the speakers with the screw holes on the top cover.
4. Replace the four screws (two on each speaker) that secure the speakers to the base cover.
5. Replace the system board (see Replacing the System Board).
6. Connect the speaker cable to the system-board connector.
7. Replace the battery (see Replacing the Battery).
Back to Contents Page
1
speakers (2)
2
screws (4)
3
speaker cable
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.