Filter
Top Products
10. Turn the computer over and open the display as far as possible.
11. Note the routing of the Mini-Card antenna cables and remove the cables from the routing guides.
12. Remove the keyboard (see Removing the Keyboard).
13. Pull the pull-tab to disconnect the touch-screen cable from the system-board connector.
14. Remove the screw that secures the display grounding cable to the top cover.
15. Pull the pull-tab to disconnect the display cable from the system-board connector.
16. Note the routing of the display cable and remove the cable from the routing guides.
17. Remove the four screws that secure the display assembly to the top cover.
18. Lift the display assembly off the computer base.
Replacing the Display Assembly
1. Follow the instructions in Before You Begin.
2. Place the display assembly in position and replace the four screws that secure the display assembly to the top cover.
1
screw
2
display grounding cable
3
display cable
4
touch-screen cable connector
1
display assembly
2
screws (4)
3
top cover