Filter
Top Products
Configuring Switching Information 397
3.
Select the
VLAN ID
from the drop-down menu.
4.
Define the
New Bridge Multicast
IP or MAC
address.
5.
In the
Bridge Multicast Group
tables, assign a setting by clicking in the
Static
row for a specific
port/LAG. Each click toggles between S, F, and blank. (not a member).
6.
Click
Apply Changes
.
The bridge multicast address is assigned to the multicast group, ports/LAGs are assigned to the group
(with the
Current
rows being updated with the
Static
settings), and the device is updated.
Assigning an Interface to an existing Multicast Group
1.
Open the
Bridge Multicast Group
page.
2.
Select the
VLAN ID
from the drop-down menu.
The associated
Bridge Multicast Address
displays.
3.
In the
Bridge Multicast Group
tables, assign a setting by clicking in the
Static
row for a specific
port/LAG. Each click toggles between S, F, and blank (not a member).
4.
Click
Apply Changes
.
The interface is assigned to the multicast group, the
Current
row is updated with the
Static
setting,
and the device is updated.
Removing a Bridge Multicast Group
1.
Open the
Bridge Multicast Group
page.
2.
Select the
VLAN ID
associated with the bridge multicast group to be removed from the drop-down
menu.
The
Bridge Multicast Address
and the assigned ports/LAGs display.
3.
Check the
Remove
check box.
4.
Click
Apply Changes
.
The selected bridge multicast group is removed, and the device is updated.
Managing Bridge Multicast Groups Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Address Table Commands
The following table summarizes the equivalent CLI commands for this feature.