Filter
Top Products
Installing System Components 75
2
Open the system. See "Opening the System" on page 59.
3
Disconnect the data/power cable from the hard drive by pulling up on the
blue tab.
4
Press the blue tabs on each side of the hard-drive bracket toward each
other and slide the bracket up and out of the bay. See Figure 3-12.
Figure 3-12. Removing a 2.5-Inch Hard Drive Carrier
5
Remove the four screws on the two sides of the hard-drive carrier and pull
out the hard drive. See Figure 3-13.
1 hard drive 2 hard-drive bracket
3 blue tabs (4)
1
3
2
Coaster_HOM.book Page 75 Monday, November 3, 2014 3:23 PM