Filter
Top Products
English- 14
Pr. Explanation Settings
Factory
Setting
NOTE
01.40
Mid-Point
Frequency (Fmid)
(Motor 3)
0.10 to 600.0 Hz
1.50
115V/230V series: 0.1V to 255.0V 10.0
01.41
Mid-Point Voltage
(Vmid) (Motor 3)
460V series: 0.1V to 510.0V 20.0
01.42
Minimum Output
Frequency (Fmin)
(Motor 3)
0.10 to 600.0 Hz
1.50
115V/230V series: 0.1V to 255.0V 10.0
01.43
Minimum Output
Voltage (Vmin)
(Motor 3)
460V series: 0.1V to 510.0V 20.0
Group 2 Operation Method Parameters
0: Digital keypad UP/DOWN keys or Multi-
function Inputs UP/DOWN. Last used
frequency saved.
1: 0 to +10V from AVI
2: 4 to 20mA from ACI or 0 to +10V from
AVI2
3: RS-485 (RJ-45)/USB communication
4: Digital keypad potentiometer
5: CANopen communication
1
a02.00
Source of First
Master Frequency
Command
For VFD*E*C models, the factory setting is 5
0: Digital keypad
1: External terminals. Keypad STOP/RESET
enabled.
2: External terminals. Keypad STOP/RESET
disabled.
3: RS-485 (RJ-45)/USB communication.
Keypad STOP/RESET enabled.
4: RS-485 (RJ-45)/USB communication.
Keypad STOP/RESET disabled.
5: CANopen communication. Keypad
STOP/RESET disabled.
1
a02.01
Source of First
Operation
Command
For VFD*E*C models, the factory setting is 5
02.02 Stop Method
0: STOP: ramp to stop; E.F.: coast to stop
1: STOP: coast to stop; E.F.: coast to stop
2: STOP: ramp to stop; E.F.: ramp to stop
3: STOP: coast to stop; E.F.: ramp to stop
0
02.03
PWM Carrier
Frequency
Selections
1 to 15kHz 8
02.04
Motor Direction
Control
0: Enable forward/reverse operation
1: Disable reverse operation
2: Disabled forward operation
0