Denon DN-HC4500 Computer Drive User Manual


 
7
ENGLISH
ENGLISH
6 SEAMLESS LOOP/HOT START/STUTTER
Seamless Loop/Hot Start/Stutter (A1,A2 buttons)
t, ye, y
q, w, y
r
Operation display
(refer to the section describing the display)
1
Setting the A point
(loading the Hot Start data)
q Push the A1 or A2
button to set the A
point and Hot Start data
loading starts.
A1 and A2 buttons can be used
separately for each Hot Start.
When an A point is set, the corresponding
A button and “ ” display light and that
button is set to the Hot Start mode.
2
Starts Hot Start
w When A1 or A2 button
is pushed, Hot Start
playback starts from
the corresponding A
point.
7
Clear the A1/A2 point
y
While pressing the FLIP button, push the
A1 or A2 button to clear the corresponding
A and B points.
Or push the FLIP button for more than 1
sec to clear both A1 and A2 points at
once.
Quickly pressing the “FLIP” button first
and then A1, A2 or B buttons will clear
these points individually.
3
Setting the B point for Seamless Loop
e When the B button is
pushed after setting
the A point or after
starting Hot start
playback, the B point is
set and Seamless Loop playback starts
from the A point.
The B button works with respect to the
A point operated before the B button
was pushed.
If the B button is pushed during Seamless
Loop playback or after EXIT playback, the
B point moves to the point at which the
button was pushed.
When the B point is set, the B and “
displays light.
4
Playing Seamless Loops
When the B point for A1 is detected
after playback started from A1 point,
playback returns to A1 point with
seamless. While A1 to B looping, B
point for A2 ignored.
When the B point for A2 is detected
after playback started from A2 point,
playback returns to A2 point with
seamless. While A2 to B looping, B
point for A1 ignored.
5
Exit/Reloop
r In Seamless Loop
playback, you can force
exit from or return to
the loop.
EXIT:
While the Seamless Loop playback, push
the EXIT/RELOOP button to exit from
loop. DN-D4000/D4500/BU4500 continues
playback after the B point.
RELOOP:
When the EXIT/RELOOP button is
pushed after exit the loop, Seamless
Loop playback resumes from the A point.
6
Stutter
A1 and A2 points can
be also used for
Stutter playback.
t To enable stutter
playback, push FLIP
button for A1/A2 buttons, then “
display turns off.
Press the FLIP button to switch between
the Hot Start/Seamless Loop and Stutter
modes.