Filter
Top Products
10
ENGLISH
ENGLISH
When the DENON DJ ASIO driver’s “ASIO Control Panel” is called out from the host application, the
DENON DJ ASIO driver displays the ASIO control panel.
Starting Up
About the control panel screen
q Device
This is the area in which the list of compatible
DENON DJ devices is displayed automatically.
(Example: DN-HC4500-1)
• Select the device to be set from the list to
display the selected device’s current settings
on the right.
• If the device is double-clicked, the status of
the ASIO device specifications device
switches between enabled and disabled.
wreq
ty
NOTE:
• Only one device can be selected.
• The device currently being used as the
ASIO device is displayed in bold
characters. (Multiple devices can be
enabled simultaneously.)
w Enable/Disable
This button is for activating the device selected
in the device display list as the ASIO device.
e Audio Buffer Size
Use this slider to adjust the buffer size.
NOTE:
• The range of values is 88 to 2048 (sample
units), in steps of 1 ms.
• When multiple devices are activated, the
settings of all the active devices are
shared.
r OK/Cancel
OK:
Use this button to close the ASIO control
panel, reflecting the changes to the settings.
Cancel:
Use this button to close the ASIO control
panel without reflecting the changes to the
settings.
t Sampling Rate
The sampling rate selection is displayed here.
The frequencies with which the DENON DJ
ASIO driver is compatible are as follows:
• 44.1kHz/48kHz/96kHz
y Device Description
This is the area in which information for the
device selected in the device information list is
displayed.
The following are displayed:
• Device name
• Unit number
•Software version
• Audio input channels
• Audio output channels
• Sampling frequency
• Max bit resolution
• Audio buffer size
NOTE:
If the device’s information cannot be
acquired, “-” (hyphens) are displayed for all
items.