Filter
Top Products
5
ENGLISH
ENGLISH
q Play Position indicators
• The white position indicator lights during
normal playback, and the position in the track
is indicated by the elapsed time.
•If the time to the end of the track is shorter
than the specified time, the playback position
indicator flashes according to the track’s
remaining time (EOM) to indicate the end of
the track.
w Loop mode indicators
•
The DN-HC4500 has two loop mode indicators,
A and B.
The A and B indicators light when A and B are
set.
e Character display
• This block displays various operational
information, text message, etc.
r File data indicators
• These indicate the type of file being played.
t
External device connection confirmation
indicator
• This lights when MIDI signals have been sent
or received between the DN-HC4500 and an
external device.
y Keyboard indicator
•
This lights when the light command is received
from a computer.
(3) Display
wretquyo
!1
!3!5 !0!2
i
!4!6
u KEY ADJ. indicator
• “KEY ADJ.” lights when in the key adjust
mode.
i Visual Marker
• The playback position is indicated according
to the playback status of the different decks.
o MEMO indicator
• The “MEMO” indicator lights when there is
memo data stored for the track that is
currently playing or set to standby.
!0 Pitch indicator
• This indicates the playing speed (pitch).
!1 BPM indicator
• This lights when the BPM is displayed in the
pitch display section.
!2 Play mode indicators
• These indicate the play mode.
CONT.:
Once playback of a track finishes, the next
track is played.
SINGLE:
Playback stops once the end of that track is
reached.
!3 Minute, second and frame displays
• This indicates the position currently playing
or at which the standby mode is set.
!4 Time mode indicators
• The display switches as follows when the
Time button is pressed:
ELAPSED:
The elapsed playing time from the beginning
of the track is displayed.
REMAIN:
The track’s remaining time is displayed.
T.ELAPSED:
The playing time from the first track on the
disc is displayed.
T.REMAIN:
The remaining time of all the tracks on the
disc is displayed.
!5 Track indicator
• This indicates the number of the currently
playing track.
!6 Connection indicators
• These indicate the connected devices
controlled by the DN-HC4500.
PC:
The DN-HC4500 is controlling the DJ
software on a PC/MAC.
CD:
The DN-HC4500 is controlling a DN-D4000/
D4500/BU4500.
✽ Playback of the USB audio signals from a
PC continues while in the CD mode.
4 DEVICE CHANGE
1
Press the SOURCE button
to display the “SOURCE”
selection screen.
Note:
• When the BACK button is pressed, source
switching is completed and the mode
returns to the normal model.
2
Turn the PARAMETERS
knob to select the device.
Press the knob again to
enter.
“OK to CHANGE” is displayed.
Note:
• The mode switches to “NO” when the
PARAMETERS knob is turned while “OK to
CHANGE?
Ø” is displayed.
• When in the “NO” mode, press the
PARAMETERS knob or BACK button to
return to step 1.
3
Press the knob again to enter.
“Completed!” is displayed and source
switching is completed.