Filter
Top Products
Test Branch
8-93910-A2-GN32-40 September 1998
BlksErrd=xxxxxxx displays the number of blocks of data found in error (block size is 1000 bits
per block). BlksRcvd=xxxxxxx displays the total number of blocks of data received. The
message NoSync appears as a value for BlksErrd while the modem’s receiver is synchronizing.
The message OvrFlw appears as the value for BlksErrd if the counter overflows.
Press the
key to display BlksRcvd=xxxxxxx, number of blocks of data received.
The Pattern test can be exited and reentered without restarting the test. The BlksErrd and
BlksRcvd continue counting.
If the Test Timeout configuration option is enabled, Test Timeout appears at the conclusion of
the test. If it is disabled, the test operates until aborted. For more information on the Test
Timeout configuration option, refer to Test in Chapter 5, DCP Configuration.
To exit this function and remain in the Test branch, press the
key. To exit and return to the
Top-Level menu, press the key.