Digicom 3910 Modem User Manual


 
COMSPHERE 3900 Series Modems
12-6 September 1998 3910-A2-GN32-40
Press the key to scroll the Set Answer Security, Set Originate Security, and Set Administrative
Password groups into view.
If an incorrect administrative password is entered, then the message PassWrd Invalid appears as
well as the last password entered. Enter the correct password value or press the
or key to
exit the Security branch.
EditPasswdTable
The Password Table is the modems security database. It contains all essential information for each
password stored in the modems nonvolatile memory. The information associated with each
password is known as a record. Records are identified by an index which is a numeric name for a
single record. A passwords record is retrieved by entering its index.
The Edit Password Table group allows you to view and/or change the modems security database
table. To do this, you must retrieve a passwords records by selecting its index. (Refer to the Select
Index section.)
The Edit Password Table group consists of the following options: Select Index, Password Type,
Edit Password, and Save Edit.
To access EditPasswdTable from Set Access Ctrl, make the following selections:
F1
Set Access Ctrl >
EditPassWdTable
F2
F3
Select EditPassWdTable.
Select Index
Select Index allows a specific record to be retrieved. Index addresses range from 0001 to 0020 for
the Model 3910 and from 0001 to 3000 for the Model 3911. The contents of this record can be
viewed, edited, and saved.
To access Select Index, make the following selections:
F1
Set Access Ctrl >
EditPassWdTable
F2
F3
Select EditPassWdTable.
F1
Select Index
Ent "0
001
F2
F3