Filter
Top Products
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
• Port – The port number.
• AuthState – The Authenticator PAE State will display one of the following: Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and N/A.
• BackendState – The Backend Authentication State will display one of the following: Request,
Response, Success, Fail, Timeout, Idle, Initialize, and N/A.
• AdmDir – The Administrative Controlled Directions are both and in.
• OprDir – The Operational Controlled Directions are both and in.
• PortStatus – The status of the controlled port can be authorized, unauthorized, or N/A.
• PortControl – The controlled port can be forceUnauthorized, auto, or forceAuthorized.
Radius Server
The RADIUS feature of the switch allows you to facilitate centralized user administration as well as
providing protection against a sniffing, active hacker. The Web Manager offers three windows.
General Radius Server
Figure 7-28. General Radius Server Setting window
This window allows you to set the following features:
• AuthProtocol [Radius Server] – Toggle between the authentication protocol options: Radius Server
(Support EAP) and Local.
• Radius Dead Time [1 ] – This specifies the number of minutes a RADIUS server which is not
responding to authentication requests is considered unavailable and is passed over by further
requests for RADIUS authentication.
• Radius Time Out [10 ] – This specifies the number of seconds NAS waits for a reply to a RADIUS
request before transmitting the request.
• Radius Maximum Retransmit [2 ] –This specifies the number of times NAS transmits each
RADIUS request to the server before giving up.
117