Filter
Top Products
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Figure 6-8. System Reboot menu
Highlight the appropriate choice and press Enter to reset the Switch’s NV-RAM to the factory default settings
(or just reboot the Switch). Loading the Factory Default Configuration will erase any User Accounts (and all
other configuration settings) you may have entered and return the Switch to the state it was in when it was
purchased. The Load Factory Default Configuration Except IP Address option is used when the Switch
will be managed by the Telnet manager, which requires knowledge of the Switch’s IP address to function.
Logging Onto The Switch Console
To log in once you have created a registered user, from the Login screen:
1. Type in your Username and press Enter.
2. Type in your Password and press Enter.
3. The main menu screen will be displayed based on your access level or privilege.
Updating or Deleting User Accounts
To update or delete a user password:
Choose User Accounts Management from the main menu. The following Setup User Accounts
screen appears:
43