Filter
Top Products
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Figure 6-17. Setup Egress Bandwidth screen
To configure egress bandwidth for a specific port, select Add/Modify in the first field and specify a port
in the next field. Next, enter a bandwidth between 1 and 127 in the last field. Finally, press APPLY and
save the changes. To delete an entry, toggle the Action field to Delete.
Configure Spanning Tree Protocol
To globally configure STP on the Switch, highlight Configure Spanning Tree Protocol on the
Configuration menu and press Enter:
Figure 6-18. Configure Spanning Tree menu
The Spanning Tree Protocol (STP) operates on two levels: on the switch level, the settings are globally
implemented. On the port level, the settings are implemented on a per user-defined group basis.
Note: The factory default settings should cover the majority of installations. Therefore, it is
advisable to keep the default settings as set at the factory unless it is absolutely necessary
to change them.
The user-changeable parameters in the Switch are as follows:
51