Filter
Top Products
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Switch, and switch settings can be saved to a TFTP server. In addition, the Switch’s history log can be
uploaded from the Switch to a TFTP server.
Please note that TFTP server software must be running on the management station for the TFTP
services listed here to work.
Update Firmware
Figure 7-58. Update Firmware from Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file
name of the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s
RAM (use Save Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate
the file transfer.
The information is described as follows:
• Server IP Address – The IP address of the TFTP server.
• File Name – The full file name (including path) of the new firmware file on the TFTP server.
Configuration File
A configuration file can be downloaded from a TFTP server to the Switch. This file is then used by the
Switch to configure itself.
Figure 7-59. Use Configuration File on Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file
name of the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s
RAM (use Save Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate
the file transfer.
The information is described as follows:
• Server IP Address – The IP address of the TFTP server.
• File Name – The full file name (including path) of the new firmware file on the TFTP server.
142