17
you change the default MAC address unless required by your
ISP.
Enter a DNS Address if you wish not to use the address
provided by your ISP.
MTU Enter an MTU value only if required by your ISP. Otherwise,
leave it at the default setting.
Home > WAN > Static IP Address
Static IP Address Choose Static IP Address if all WAN IP information is provided
to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided
to you by your ISP. Each IP address entered in the fields must
be in the appropriate IP form, which are four octets separated
by a dot (x.x.x.x). The Router will not accept the IP address if it
is not in this format.
IP Address Input the public IP Address provided by your ISP.
Subnet Mask Input your Subnet mask. (All devices in the network must have
the same subnet mask.)
ISP
Gateway Address Input the public IP address of the ISP to which you are
connecting.
MAC Address The default MAC Address is set to the WAN’s physical interface
MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by