28
Server.
Name Enter the name of the Virtual Server. If you have chosen a
pre-configured Virtual Server from the list, its name will appear
in this field.
Private IP Enter the IP address of the Virtual Server.
Protocol Type The protocol type used for the Virtual Server. The user may
select TCP, UDP or Both, depending on the type of Virtual
Server implemented.
Private Port Enter the port number of the Virtual Server’s computer. Existing
Virtual Servers listed already have their well-known port
number listed yet this may need to be changed in certain
circumstances.
Public Port Enter the port number of the device on the WAN side of the
network that will be accessing the Virtual Server currently being
configured. Commonly, this port number is identical to the
Private Port number. Existing Virtual Servers listed already
have their well-known port number listed yet this may need to
be changed in certain circumstances.
Schedule Configure the time schedule you wish these Virtual Servers to
be accessed. Clicking the Always radio button will allow access
to these servers at any time. The user may set a strict time
period by clicking the From radio button and configuring a time
period for access.