Filter
Top Products
32
Port A port or range of ports that will be denied access to the
Internet. If no port is entered, all ports in this IP range will be
denied access to the Internet.
Protocol Type The protocol associated with this IP filter. The user may choose
between TCP, UDP or Both.
Schedule The user may configure time intervals that these IP filters will
become active. Clicking the Always radio button will not allow
access to these IP filters at any time. The user may set a strict
time period by clicking the From radio button and configuring a
time period to deny these IP addresses from accessing the
Internet.
Advanced > Filters > MAC Filters
Disabled MAC Filters Click this radio button to disable MAC filtering on the
Router.
Only Allow Click this radio button if you wish to allow specific
computers access to the network, based on MAC
address.
All computers are
uniquely identified by
their MAC (Media
Access Control)
address. The
following window will
allow users to deny
computers access to
the Internet or only
allow certain
computers access to
the Internet, based on
their MAC address.
To access this
window, click the
Advanced tab along
the top of the
configuration window,
then the Filters tab to
the left hand side and
finally click the
corresponding radio
button for MAC
Filters.