Filter
Top Products
DSL-G804V Wireless ADSL Router User’s Guide
MPoA (RFC1483/RFC2684, Multi protocol Encapsulation over AAL5)
Figure 3-6. WAN Setup window - MPoA
Parameter Description
Encapsulation
Method
Select the encapsulation format, this is provided by your ISP.
IP Assignment
Please click Obtain an IP address automatically via DHCP client to enable
the DHCP client function or click Specify an IP address to disable the DHCP
client function, and specify the IP address, Netmask and Gateway manually.
The setting of this item is specified by your ISP.
RIP (Routing
Information
Protocol)
It is an interior routing protocol for router to exchange routing information.
MTU (Maximum
Transmission Unit)
This is the size of largest datagram (excluding media-specific headers) that IP
will attempt to send through the interface. The default setting is 1500.
NAT (Network
Address
Translation)
This allows multiple users to access the Internet through a single ISP account,
sharing a single IP address. If users on your LAN have public IP addresses
and can access the Internet directly, the NAT function can be disabled.
ATM Class
The Quality of Service for ATM layer.
23