Filter
Top Products
DSL-G804V Wireless ADSL Router User’s Guide
ADSL
This is the ADSL parameter adjustment and information section. The parameter is already being pre-defined and
not necessary to reconfigure if you do not understand this feature.
Figure 4-23. ADSL
Parameter Description
Connect Mode
Connection line mode ADSL2/ADSL2+.
Modulation
For ADSL connection, this mode will automatically detect your ADSL line code,
G.dmt, G.lite, and T1.413. But in some area, multimode cannot detect the
ADSL line code well. If it is the case, please adjust the ADSL line code to
G.dmt or T1.413 first. If it still fails, please try the other values such as ALCTL,
ADI, etc. For ADSL2 connection, this mode automatically detects your line
code to G.DMT.Bis.
Activate Line
Aborting (false) your ADSL line and making it active (true) again for taking
effect with setting of Connect Mode.
Coding Gain
Configure the ADSL coding gain from 0 dB to 7dB, or automatic.
Tx Attenuation
Setting ADSL transmission attenuation.
DSP Firmware
Version
Firmware version of the Digital Signal Processor.
Connected
Operational Mode
Display current ADSL line sync status.
Annex Type
ADSL Annex A, which works over a standard telephone line. Annex B, which
works over an ISDN line.
Upstream Bit Rate
Display current upstream rate of your ADSL line.
Downstream Bit
Rate
Display current downstream rate of your ADSL line.
65