Filter
Top Products
DSL-G804V Wireless ADSL Router User’s Guide
LAN Setting – Ethernet Port Setting
This allows you to configure the settings for the router’s Ethernet ports to solve some of the compatibility
problems that may be encountered while connecting to the Internet, as well allowing users to tweak the
performance of their network.
Figure 3-11. Home – LAN Settings (Ethernet Port Setting)
Parameter Description
Port # Connection
Type
Five options to choose from: Auto, 10M half-duplex, 10M full-duplex, 100M
half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility
problems with legacy Ethernet devices, and you can configure different types
to solve compatibility issues. The default is Auto, which users should keep
unless there are specific problems with PCs not being able to access your
LAN.
IPv4 TOS priority
Control (Advanced
users)
TOS, Type of Services, is the 2
nd
octet of an IP packet. Bits 6-7 of this octet
are reserved and bit 0-2 are used to specify the priority (precedence) of the
packet, and bits 3-5 are specified the delay, throughput and reliability.
Set High Priority
TOS
This feature uses bits 0-2 to classify the packet’s priority. If the packet is high
priority, it will flow first. Therefore, when this feature is enabled, the router’s
Ethernet switch will check the 2
nd
octet of each IP packet. If the value in the
Precedence of TOS field matches the checked values in the table (0 to 7), this
packet will be treated as high priority.
28